- Televisions[1]
- LCD Modules[10]
- LED Backlights[10]
- Plastic Sheets[4]
- Panel Display[1]
31.5'' tft LED LCD module for tv
Product Detailed
1.LED Type
2.Luminance: 380cd/m2
3.RoHS certification
4.Power Consumption: 40W
5.Grade A, New
SPECIFICATION | ||||||
Module Name | TXW011/TXW012(31.5") | |||||
Item | Min | Typ | Max | Unit | ||
Contrast Ration | - | 3000 | - | - | ||
Response Time | - | 6.5 | 12 | ms | ||
Luminance | 350 | 380 | - | cd/m2 | ||
Color Chromaticity | White | x | Typ-0.03 | 0.279 | Typ+ 0.03 | - |
y | 0.292 | |||||
Red | x | 0.637 | - | |||
y | 0.335 | |||||
Green | x | 0.31 | - | |||
y | 0.64 | |||||
Blue | x | 0.145 | - | |||
y | 0.062 | |||||
Viewing Angle | Horizontal | x | - | 50 | - | Deg. |
Vertical | y | - | 50 | - | ||
Power Consumption | 40 | W |
Operating precaution
The device listed in the product spec sheets was designed and manufactured for TV application.The spike noise causes the mis-operation of circuit. It should be lower than following voltage: V=±200mV(over and under shoot voltage).Response time depends on the temperature. (In lower temperature, it becomes longer).Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or electrical contacted parts. And after fading condensation, smear or spot will be occurred.When fixed patterns are displayed for a long time, remnant image is likely to occur.Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall be done by system manufacturers. Grounding and shielding methods may be important to minimize the interface.
Other products